172.17.6.126
172.17.6.126 is a private IPv4 address in the 172.16.0.0/12 block reserved by RFC 1918 for use inside private networks.
Only works from a device on the same network. The page that opens is served by your own hardware — nodedata.io does not proxy or store anything from it.
What 172.17.6.126 is used for
This address belongs to 172.16.0.0/12, the middle private IPv4 range from RFC 1918, covering 172.16.0.0 through 172.31.255.255. It is not routed on the public internet, so the device answering at this address sits on your own network. Note that 172.0.0.0–172.15.255.255 and 172.32.0.0 upward are ordinary public addresses — only the /12 in between is private.
172.16.0.0/12 is common in enterprise networks, on VPN and site-to-site tunnel interfaces, and inside container platforms — Docker hands out 172.17.0.0/16 by default, and an AWS default VPC is 172.31.0.0/16.
Common default gateways in 172.16.0.0/12
No router ships with 172.17.6.126 as its factory address. These are the addresses in 172.16.0.0/12 that vendors do use — one of them is probably the router you are looking for.
- 172.16.0.1 Top Global
- 172.30.1.254 KT
Brand names are the trademarks of their respective owners and are listed only to identify which hardware ships with these addresses. nodedata.io is not affiliated with, endorsed by, or sponsored by any of them.
172.17.6.126 questions
Connect to the network the device is on — over Wi-Fi or Ethernet — then open http://172.17.6.126. Use the button at the top of this page, or type the address into your browser yourself. You will land on the device's own login page, served by the device, not by us.
If it asks for credentials you have never set, check the sticker on the underside of the router: most ship with the default printed there.
Four things to check, in order:
- You are on the right network. 172.17.6.126 is private, so it only exists on the local network. On mobile data or a VPN you will never reach it.
- 172.17.6.126 is actually your gateway. Run
ipconfigon Windows orip routeon Linux/macOS and look at the default gateway — plenty of routers use a different address. - Try HTTPS. Newer firmware often redirects to
https://172.17.6.126and refuses plain HTTP. - The device may be in bridge mode or have its web interface disabled, in which case there is nothing listening at all.
There is no single answer — it is set by whoever made the device, and modern routers increasingly ship with a unique password per unit. Look for a label on the device itself. The old generic pairs (admin/admin, admin/password, blank/admin) only still work on unconfigured or older hardware, and if one of them does work on your router you should change it.
No, because nobody does. 172.17.6.126 is inside 172.16.0.0/12, which RFC 1918 reserves for private use, so it is in service on countless networks simultaneously and there is no owner, no registration and no geolocation to look up. That is also why an IP lookup returns nothing for it: there is no global record to return. If you are trying to trace something, you need the public address of the network it came from.
This address belongs to 172.16.0.0/12, the middle private IPv4 range from RFC 1918, covering 172.16.0.0 through 172.31.255.255. It is not routed on the public internet, so the device answering at this address sits on your own network. Note that 172.0.0.0–172.15.255.255 and 172.32.0.0 upward are ordinary public addresses — only the /12 in between is private.
172.16.0.0/12 is common in enterprise networks, on VPN and site-to-site tunnel interfaces, and inside container platforms — Docker hands out 172.17.0.0/16 by default, and an AWS default VPC is 172.31.0.0/16.
The block runs from 172.16.0.0 to 172.31.255.255 — 1,048,576 addresses in total — and is defined by RFC 1918.
References
The classification of 172.17.6.126 and the description of 172.16.0.0/12 on this page are taken from the following primary sources.